Lowrance AirMap 600c, Руководство по эксплуатации

Страница: 72 / 152

64
The distance to Dallas from the starting point is 207.5 nautical miles.
Find Distance From Point to Point
You can also measure distance between two other points on the map.
1. While on the Map page press:
MENU
| ↓ to
F
IND
D
ISTANCE
|
ENT
.
2. Center your cursor over the first position. (A rubber band line ap-
pears, connecting your
current position to the cursor's location.) Press
ENT
to set the first point, and the rubber band line disappears.
3. Move the cursor to the second position. The rubber band line reap-
pears, connecting the first point you set to the cursor. The distance
along that line will appear in the lower right-hand corner of the screen.
4. Press
EXIT
to clear the command and return to the page screen.
Find Your Current Position
Finding your current position is as simple as turning AirMap on. Under
clear sky conditions, the unit automatically searches for satellites and
calculates its position in approximately one minute or less.
NOTE:
"Clear sky" means open sky, unobstructed by terrain, dense foliage
or structures. Clouds do not restrict GPS signal reception.
If for some reason satellite acquisition takes longer, you may be inside
a structure or vehicle or in terrain that is blocking signal reception. To
correct this, be sure you are positioned so that the unit has as clear a
view of the sky as possible, then turn the unit off and back on again.
If you have the cursor activated, any information the unit gives you
will be based on the cursor position, not your own. If you want to find
where you are, just press
EXIT
until the cursor goes away and the map
snaps back to center on your position.