32
Hygiene treatment
EN
6.4 Clean coarse dust filter/change fine filter
1. Remove the filter compartment lid on the rear of the
device.
2. Remove the coarse dust filter and clean it under clean
running water until there are no residues.
3. Replace the fine filter if necessary. It cannot be cleaned.
4. Leave the coarse dust filter to dry.
The coarse dust filter must be completely dry before the
device is started up.
5. Put the coarse dust filter back in and push the lid back
onto the rear of the device.
6.5 Accessories
See the section entitled “Cleaning” in the relevant instructions for use with regard to clean-
ing the exhalation system, the breathing mask, the headgear/head strap, the bacteria filter
and the SOMNO
click
300 respiratory air humidifier.
6.6 Disinfect therapy device
If required, e.g. following infectious diseases or unusual contamination, you can also dis-
infect the housing, the power cord and the breathing tube. Follow the instructions for use
for the disinfectant used. It is recommended that suitable gloves (e.g. household or dispos-
able gloves) are used for disinfecting.
Therapy device
We recommend terralin
®
protect as a disinfectant for disinfecting by wiping.
Warning! Risk of electric shock!
Before disinfecting, it is essential to disconnect the power cord from the power
supply connection and to remove the plug from the socket.