39
Assembling instrunctions and maintenance
1.
ON/OFF
The
ON/OFF
of the controller is through the prolonged pressure of the button
K1
The OFF state is signalled with the blinking led OFF
2.
Visualizations
Normally the display shows sensor 1 temperature.
The sensor 2 temperature is showed by the prolonged pressure of
K1
3.
ALARM Function
If the temperature read by the
sensor
is over the value Alarm Thermostat
(A90°C)
The acoustic and visual signal is activated
SILENCE
Function: the acoustic signal can be deactivated for 5 minutes pushing any
button. If the alarm condition remains the acoustic signal starts again
4.
ANTI FREEZING Function
If the temperature read by the
Sensor
is lower than the value of the Anti Freezeing Thermostat (3°C)
The Pump
P1
is activated and the display shows
ICE
5.
STANDBY Function
If the system is
OFF
, in condition of
ALARM
or
ANTI FREEZING
The device starts
ON
6.
ANTI BLOCK Pump Function (P1 and P2)
If the pumps are OFF for a time over the Anti Block Timer
t01
(also in STANDBY Status)
The Pumps are activated for
T02
seconds and the display shows
bLP
7.
Pump TEST Function P1
Through a prolonged pressure of the button
K2
The Pump
P1
is activated for the time of the button’s pushing and the display shows
tSt
8.
Pump TEST Function P2
Through
a
prolonged pressure of the button
K3
The Pump
P2
is activated for the time of the button’s pushing and the display shows
tSt