31
1
2
3
4
5
6
7
8
Heating circulation pump;
Primary circuit pump;
Brazed plate iron steel heat exchanger (primary circuit);
Degasser / dirty separator system with drain tap and manual air
vent valve;
Brazed plate iron steel heat exchanger (DHW circuit);
3-port diverting proportional valve with thermostatic actuator;
Anticondensation valve;
3-port motorized diverting valve with actuator
DIMENSIONS AND CONNECTIONS
UACS
UAFS
IP
UP
MI
RI
EAFS
¾” F
¾” F ¾” F
¾” F ¾” F
¾” F ¾” F
480
80
60
100
60
70
50
30
30
Heating supply
Primary return
Heating return
DCW outlet
Primary supply
DCW inlet
DHW outlet
F 3/4”
F 3/4”
Accessories installation (Only for separately supply)
T-FIRE MODUL with kit “S” DHW PRODUCTION
a - Shut off the ball valves of the T-Fire (separately supplied)
b - Unscrew the caps ref.1 as shown in the picture and remove the
pipe
c - Remove the tap ref.2
d - Connect the kit “B” (ref.3) for DHW tank with the washers and
screw the nuts
e - Controllare la tenuta idraulica del modulo.
f - Connect the servomotor of the diverter valve to the terminal
board of the module (see chapter – electric connections) e re
golare set the thermostatic valve up for the control of DHW
g - Switch on the module
h - Check the correct functioning of the module
3
2
1
1
HYDRAULIC SCHEME
IP
UP
UACS
UAFS
EAFS
MI
RI
3
1
4
2
6
5
7
8
Accessories
Assembling instrunctions and maintenance
