LOVATO ELECTRIC DMK40, Руководство пользователя программного обеспечения

Страница: 2 / 20

Code: MSGB202$0500.doc 18/06/2004 P. 2 / 20
Introduction
Using the DMK40 series multimeter data setting and acquisition software, you can:
•
Set the measurements to be sampled according to sampling time.
•
Display the data unloaded by the DMK40 in MS-Access format.
•
Display the measurements in graphic format.
•
Convert the MS-Access tables acquired by the DMK40 multimeter in ASCII or MS-Excel text format.
•
Plot graphs of the measurements sampled.
•
Display a ‘virtual’ representation of the front panel of the multimeter with the possibility of accessing all
the measurements and of activating the buttons.
•
Display and modify the set-up parameters of the multimeter with the possibility of saving the settings on
disk, of recalling and printing these.
•
Change the language of the program menus and commands selecting either Italian or English.
Minimum resources of the PC
•
Windows
®
95/98/2000 operating system
•
Graphic card with a minimum resolution of 800x600; 1024x768 or higher is recommended
•
A free standard RS232 serial interface (COM:)
•
64Mb of RAM
•
Pentium
®
class or higher processor
•
CD-ROM drive for installation
Installation
For installation, you need a PC with the operating system already installed and running and the program
setup CD. You should also have at least a basic knowledge of the PC and be familiar with Windows
®
operating system commands.
The software is delivered on a CD with two different installation procedures. The standard installation
procedure used with the first releases of the Win 95 and 98 operating systems is held in the
Setup1
directory. The Setup2 directory contains a new installation procedure for the latest releases of the Win 98
operating system and for Win 2000.
Setup1:
1. Close all applications running
2. Insert the CD in the drive
3. From the Setup1 directory, start the Setup.exe program
4. Press the button with the PC icon to start the installation procedure.
5. A window is displayed asking you to specify the directory in which you want to install the program. To
change directory, enter the new name in the specific box.
6. Follow the instructions provided. If a message is displayed indicating that there are more recent files
present on the PC than those being installed, maintain the files already present (answer YES or ‘keep’ to
the prompt)
Setup2:
1. Close all applications running
2. Insert the CD in the drive
3. From Setup2 directory, start the Dmk.msi program
4. If your PC does not recognize the .msi (microsoft installer) files, start the InstMsiA.exe program and
then go back to point 3.
5. A window is displayed asking you to specify the directory in which you want to install the program. To
change the directory, enter the new name in the specific box.
1. If rebooting of the system is requested following installation, carry out the procedure