background image

46

Event / Sensor 

ALARM INPUT

Configurations for any external alarm device 
(i.e. a Door or Window Sensor). Refer to 
page 73 for hardware configuration details.

• 

Operation 

- Sets the Alarm Sensor 

Connection Status (Enable / Disable) for 
an external alarm (i.e. Door or Window 
Sensors). Refer to page 73 for setup 
diagram.

• 

Type: 

Sets the Alarm Sensor type to N/

O (Normally Open) or N/C (Normally 
Closed).

z

N/O (Normally Open) - 

Select for an 

Alarm that has a Normally Open circuit (such 
as a door that remains open). An Alarm will 
occur when this is changed to a Closed 
status.

z

N/C (Normally Closed) - 

Select for an 

Alarm that has a Normally Closed circuit 
(such as a Window Sensor). An Alarm will 
occur when this is changed to a Opened 
status.

ALARM OUT

Sends an Alarm Out signal to a device (such 
as a Manual Door or independent Light/
Buzzer Alarm) when an Alarm In event is 
detected

• 

Channel

 - Select a Channel to configure.

• 

Mode

 - Setup Reacted Relay as either 

Latched or Transparent Mode:

z

Latched – When sensor alarm activated, 

relay reacted in setup duration. 

z

Transparent – Relay reacted temporary 

during sensor alarm activate.

• 

Type

 - Set the Relay Type to either N/O 

(Normally Open) or N/C (Normally 
Closed).

• 

Operation

 - Setup Relay Connect with 

Alarm Sensor to either Enable or 
Disable.

Содержание SG17LD800











































































































Отзывы: