Explanation of two Symbols
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance-
(servicing) instructions in the literature accompanying the appliance.
THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON
THE BOTTOM OF THE SYSTEM.
WARNING:To prevent fire or shock hazard, do not expose this
appliance to rain, water, or wet locations. Do not insert
any metallic object through the ventilation grills.
IMPORTANT SAFETY INSTRUCTIONS
This wireless A/V equipment is provided with a polarized alternating-current line
plug (a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
!
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
!
1
5.TR O U BLE SH O OTING
If the system does not function properly, check the following points before contact the
service center.
Basic system includes
1- Wireless Camera
1- Wireless A/V Receiver Monitor
2- AC Adapters
--12V/0.5A Adapter (Camera)
--12-14V/1.2A Adapter (Monitor)
1- RCA A/V Cables or Scart A/V Cables (Option)
1- Owner's Manual/Warranty Card
1- Camera Mount
1- Warning Decal
Problems
Causes and remedies
Camera
Monitor
- AC adapter not plugged in
- Power switch not turned on
- Monitor not turned on
No power
(no picture/sound)
- AC adapter not plugged
in
- Power switch not turned
on
- Adjust antenna direction
- Improper channel 1-2
selection
- AC adapter not plugged
in
- Power switch not turned
on
Poor reception
Picture flickering
Picture too bright,
or too dark
-Strong spot light in the
field of view
-Lighting source in the
field of view
- Adjust brightness control
on Monitor
- Adjust antenna direction
- Adjust antenna direction
Picture rolls and jumps
or scrambled picture
16
