Lorex SG 6040, Руководство по эксплуатации

Страница: 10 / 10

8 9
WIRELESS MONITOR
1.Connect the supplied 1.2A AC adapter to the DC INPUT JACK at the rear
of the receiver monitor and plug it into the 230V(or 120V) AC outlet.
Or 1a. Connect the DC Plug from Battery Case to the DC INPUT JACK at
the rear of the Receiver Monitor.
DC INPUT Jack
12-14V 1.2A
AC Adapter
2.INSTALLATION 2.INSTALLATION
WIRELESS CAMERA
1.Attach the stand base to the wall or ceiling where you want to
install the camera. Locate a wall stud or ceiling joist and secure bracket using the
three supplied screws.
2.Attach the camera to the stand and firmly tighten the swivel.
3.Attach the camera with the stand to the stand base and firmly tighten the joint knob
on the stand base.
4.Connect the supplied 12V 500mA AC adapter to the DC IN jack at the rear of the
camera and plug it into 230V (or 120V) AC outlet.
DC 12V 500 mA
AC Adapter
Battery Case & Compartment
Remove the battery case by screwing down bolt at the rear side and sliding out
case. The battery feature requires 10 Pcs ‘C’ sized batteries.
Warning : To prevent injury. Do not reverse any Battery & Do not mix
Battery type.
Plug
Plug