SAFETY INSTR U CTIONS
IMP O RTA NT SAFE G U A R D S
All the safety and operating instructions should be read before the
appliance is operated and retained for future reference.
1. HEED WARNINGS
- All warnings on the appliance and in the operating
instructions should be adhered to.
2. FOLLOW INSTRUCTIONS
- All operating instructions should be
followed.
3. WATER AND MOISTURE
- Do not use this video product near water -
for example, a bath tub, wash bowl, kitchen sink, laundry tub or swimming
pool, or in a wet basement.
4. POWER SOURCES
- This product should be operated only from the type
of power source indicated on the marking label.
5. POLARIZATION
- This video monitor equipment is provided with a
polarized alternating current line plug (a plug having one blade wider than
the other ). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
6. OVERLOADING
- Do not overload outlets and extension cords, which
can result in a risk of fire or electric shock.
7. SERVICING
- Do not attempt to service this product yourself. Opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing or repairs to qualified service personnel.
2.Turn on the Camera and all Receiver Monitors. Search the channel 1-2 by
using channel Selector Switch on the Camera and Receivers Monitor and
select best one for optimum reception in your area.
3.Adjust the antenna direction as necessary.
All Receiver Monitor and Camera units must be set to same channel.
NOTE
15
2
4.MULTIPLE CHA N N EL O P E R ATION
ONE CAMERA BY MULTIPLE RECEIVER OPERATION
You can receive A/V signal from the Wireless Camera on several Receiver monitors
in remote location at the same time using one Wireless Camera with multiple
Wireless Receiver as many as you want.
Channel Selector
Switch
Transmitter
1.Connect all Receiver Monitors with or without VCR using RCA cables.
(see instructions on page 12)
Be sure to set the Power Switches on the Camera and the Receiver to the OFF
position before proceeding with the following steps.
System includes only one Receiving Monitor and one Sending unit Additional
units are optional.
NOTE
NOTE
Receiver Monitor-1
Channel Selector
Switch
