Lorex LW2750 Series, Руководство пользователя

Страница: 39 / 66

Scan Mode
12
In Scan mode, the receiver’s LCD screen and speaker will turn off unless motion is de-
tected by one of the cameras. The LCD screen turns on and displays video from the cam-
era where motion was detected for 15 seconds before turning off again. This conserves
battery power and alerts you only when needed.
You can configure how much motion is needed to turn the display on in Scan mode by
changing a camera’s video motion detection settings. See 10.4.3
Configuring Video Mo-
tion Detection , page 27.
To enable Scan mode:
1. Enter live viewing mode.
2. Press on the front panel of the receiver.
3. Press again to exit Scan mode.
Note
When exiting Scan mode, the receiver resumes live viewing in Auto Sequence Viewing mode.
#LX400011; r. 1.0/11916/13451; en-US
33