Lorex LW2602 Скачать руководство пользователя страница 4

Important Safeguards

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Service 

 

13.

 

Servicing

 - Do not attempt to service this 

video equipment yourself as opening or 
removing covers may expose you to 
dangerous voltage or other hazards. Refer all 
servicing to qualified service personnel. 

 

14.

 

Conditions Requiring Service

 - Unplug this 

video product from the wall outlet and refer 
servicing to qualified service personnel under 
the following conditions. 

A.

 

When the power supply cord or plug is 
damaged. 

B.

 

If liquid has been spilled or objects have 
fallen into the video product. 

C.

 

If the video product has been exposed to 
rain or water. 

D.

 

If the video product does not operate 
normally by following the operating 
instructions. Adjust only those controls 
that are covered by the operating 
instructions. Improper adjustment of 
other controls may result in damage and 
will often require extensive work by a 
qualified technician to restore the video 
product to its normal operation. 

E.

 

If the video product has been dropped or 
the cabinet has been damaged. 

F.

 

When the video product exhibits a 
distinct change in performance. This 
indicates a need for service. 

 

15.

 

Replacement Parts

 - When replacement 

parts are required, have the service 
technician verify that the replacements used 
have the same safety characteristics as the 
original parts. Use of replacements specified 
by the video product manufacturer can 
prevent fire, electric shock or other hazards. 

 

16.

 

Safety Check

 - Upon completion of any 

service or repairs to this video product, ask 
the service technician to perform safety 
checks recommended by the manufacturer to 
determine that the video product is in safe 
operating condition. 

 

17.

 

 Mounting

 - The cameras provided with this 

system should be mounted only as instructed 
in this guide, using the provided mounting 
brackets. 

 

18.

 

 Heat

 - The product should be situated away 

from heat sources such as radiators, heat 
registers, stoves, or other products (including 
amplifiers) that produce heat. 

Use 

19.

 

Cleaning

 - Unplug the video product from the 

wall outlet before cleaning. Do not use liquid 
cleaners or aerosol cleaners. Use a damp 
cloth for cleaning.

  

 

20.

 

Product and Cart Combination

 - Video and 

cart combination should be moved with care. 
Quick stops, excessive force, and uneven 
surfaces may cause the video product and 
car combination to overturn

 

 

21.

 

Object and Liquid Entry

 - Never push 

objects for any kind into this video product 
through openings as they may touch 
dangerous voltage points or “short-out” parts 
that could result in a fire or electric shock. 
Never spill liquid of any kind on the video 
product

 

 

22.

 

Lightning

 - For added protection for this 

video product during a lightning storm, or 
when it is left unattended and unused for long 
periods of time, unplug it from the wall outlet 
and disconnect the antenna or cable system. 
This will prevent damage to the video product 
due to lightning and power line surges. The 
manufacturer’s instructions and use a 
mounting accessory recommended by the 
manufacturer.

 

Содержание LW2602





















Отзывы: