Troubleshooting
17
Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please try the
following:
Problem Solution
There is no picture from a
Camera.
•
Check all connections to the Camera. Make sure
the adaptor is plugged in.
•
Make sure that the Cameras and Receiver are
both ON.
•
Make sure that the camera is in range of the
Receiver.
There is Interference with
the Camera Picture.
•
Make sure that each camera is within range, and
that there are no large obstructions or interference
•
Try repositioning the camera, receiver or both to
improve the reception.
The picture is dropping
•
Move the camera closer to the receiver.
•
Try repositioning the camera, receiver or both to
improve the reception.
The Picture is or has
become Choppy
•
The picture may become choppy when
experiencing a lower frame rate (i.e. 10 frames
per second vs. a higher 20 frames per second).
•
Try moving the camera closer to the receiver.
•
Remove obstructions between the Receiver and
Camera.
There are problems with
the Audio.
•
Ensure that the volume on the TV is ON
•
Make sure that there is sound within range of the
Camera Microphone
•
If the unit emits a loud screeching noise
(feedback), move the camera or receiver farther
apart.
•
Increase volume on wireless monitor/receiver*
The Picture appears to be
grainy when using AV out
function to view on a large
screen TV/Monitor
•
The purpose of the AV output is for convenience
only. When using with large screen TV/Monitor,
the picture might be grainy as the camera limits
video resolution to VGA (640x480 pixels). This is
not a product defect.
•
For best performance use with TV/Monitor PIP
(Picture in Picture) function. Check your
TV/Monitor product manual to see if this feature is
available on your TV/Monitor
•
View video on a smaller screen TV/Monitor
