Using the LCD Monitor/Receiver
12
Using the LCD Monitor/Receiver
With the camera(s) and LCD monitor connected and powered on, you can now begin to use the functions
and features of the LCD monitor/receiver.
•
To power the monitor ON/OFF, press the
button.
Adjusting the Display
To adjust the display image:
1.
Press the
button on the front
panel to adjust the following
display settings:
•
Brightness
•
Contrast
•
Saturation
(Color: A high
value results in a redder
image, a low value in a
greener image)
•
Sharpness
2.
Press the
buttons to
increase/decrease the values for
each of these settings.
Adjusting the Volume
•
Press the
buttons to increase/decrease the output volume.
Changing Channels
•
Press the
CH button
on the front panel to select from channels 1~4, Auto-Scan, and
Quad split screen viewing modes.
Note
: Pair button is raised on the front panel for a tactile difference between it and the
VGA/QVGA button.
Connecting to a TV, VCR, DVR, or Observation System
To use video out:
1.
Connect one end of the RCA audio/video cable (included) to the audio/video cable from the
receiver.
2.
Connect the other end of the RCA audio/video cable to the audio/video ports on your TV or
VCR. For a DVR or observation system with BNC, use the included RCA-to-BNC adaptor.
Figure 4.0 Adjust the display of the monitor/receiver
