Assembling the Wireless LCD Monitor/Receiver
11
Assembling the Wireless LCD Monitor/Receiver
To assemble the wireless LCD monitor/receiver:
1.
Attach the stand to the back of the monitor.
2.
Screw on the wireless antenna to the side of the monitor.
3.
Connect cable to power adaptor.
4.
Place the receiver in a place that will have a clear reception to your camera(s)*.
Note
:
OPTIONAL
: If desired, you can also mount the stand to a wall or counter/under-counter.
Connecting the Camera
Before you install the camera, carefully plan where and how it will be positioned, and where you will route
the cable that connects the camera to the power adaptor.
•
Before starting permanent installation, verify its performance by observing the image on a monitor
when camera is positioned in the same location/position where it will be permanently installed.
Installation Warnings
•
Aim the Cameras to best optimize the viewing area: Select a location for the camera that provides
a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to
a strong light source or direct sunlight.
•
Avoid installing the cameras where there are thick walls or obstructions between the Cameras
and the receiver*.
•
Select a location for the camera that has an ambient temperature between 14°F~113°F
(-10°C~45°C)
Figure 3.0 Assembling the monitor
*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and
metal structures. This will reduce the range of transmission.
ATTENTION
: Make sure to first connect and power on the cameras before powering
on the monitor; this will ensure a proper connection.
