Chapter 4 Front Panel Operation
4-5
Press
ENTER
from Console Port Trap IP menu
IP>INTERF MY-IP SUBNET GATEWAY
T
RAP-IP
Trap IP Address= 255.255.255.255
The Trap IP Address menu shows the current destination IP address the Loop-V 4200 uses to send an
SNMP trap. The default Trap IP address is a broadcast address (255.255.255.255). To change the Trap IP
address, use the arrow keys to cycle through to the position, and press
ENTER
to cycle through the numbers.
This operation must be concluded by moving the cursor to OK position and pressing
ENTER
to enable the
changes.
NOTE
: My IP and Trap IP menu only available when the SNMP feature is purchased.
4.2.2 DATE
The Date menu is used to set a new Real Time Clock (RTC) date. From the Configuration menu, use the
cursor to select the Date menu. Press
ENTER
from Configuration Date menu
To change the date, use the arrow keys to move to the digital position, and press
ENTER
to cycle through
the numbers. This operation must be concluded by moving the cursor to OK position and pressing
ENTER
to
enable the changes.
CONTROLLER>IP
D
ATE INFO TSI-MAP MCLK
11:41:40 10/06/1998
DATE>11:42:20 10/06/1998 YES
0123456789
4.2.3 INFO
This Information item displays the software version. It is a read only message.
CONTORLLER>IP DATE
I
NFO TSI-MAP MCLK
INFO>S/W H/W SERIAL
INFO>
S
/W H/W SERIAL
Version: V0.07 10/01/1998
