Look 795 LIGHT RS, Руководство пользователя

Страница: 31 / 104

29
EN
End cap
These are the steps you need to take if you have to
replace cap (F) (the cap is fitted in front of the handlebar
and the stem).
1 / Place liners
②
and
③
abutting in their grooves (Fig. 7).
2 / Insert the casings with their ends (Fig. 7).
3 / Screw stop (F) with screw
⑧
, making sure that the
casings stay firmly inside cap (F).
F End cap
2 Rear derailleur liner
3 Front derailleur liner
4 Derailleur cables
5 End caps
6 Liner ends
7 M5 square nut
8
Screws FHC M5x12
(
torque 2N.m
)
9 Brake housing passage
G Liner guide
1 Rear derailleur liner passage
2 Front derailleur liner passage
8 Screws FHC M5x12 ( torque 2 N.m )
1
2
3
4
5
6
9
7
8
Fig. 7
1
2
8
Fig. 8
N.B. :
screws
⑧
are pre-coated with threadlock. They must not be greased. However, after
they have been removed and refitted a few times, a drop of normal threadlock will have to
be applied (type LOCTITE 2400
TM
).
F
G