8
4. Fluid
5. Operating the Viper 2.6
4.2 Changing the fluid can
– Disconnect the fluid tube from the lid by retracting the brass collar [12] and
removing the coupling [11].
– Remove the can from the tank housing of the
Viper 2.6
– Unscrew the lid [13] of the empty can and screw it onto the new container.
– Place the full can into the tank housing.
– Push the brass coupling [11] into the brass collar [12] until you hear a click.The
brass collar is now locked firmly.
4.1 General Notes
5.1 Selecting the location
The location in which the
Viper 2.6
is to be operated must
– be dry,
– be free from dusty or polluted air,
– be free from vibrations,
– be an non-flammable place or surface,
– be well-ventilated with fog-free air keeping the ambient operating temperature
between 5
°
C and 45
°
C and the relative air humidity below 80%.
The
Viper 2.6
has been designed to be used with Look fog fluids.
The following Look fog fluids are available:
Quick-Fog
thick, quick disappearing fog fluid
Regular-Fog
thick, long lasting fog fluid
Slow-Fog
thick, extremely long lasting fog fluid
If fluids have been used other than Look fog fluids we can‘t grant warranty on
parts that have been in contact with the fluid.