![background image](http://html1.mh-extra.com/html/look-solutions/viper-2-6/viper-2-6_operating-manual_1938902016.webp)
16
6. Cleaning, Care and Maintenance
– Ensure the air vents [7] are not clogged by dust. If necessary remove the dust.
– Take care that the machine can not get overheated.
– Do not run the
Viper 2.6
without any fluid, as the pump will run dry.
– Wipe up spiled Fluid immediately. Moisture – also fluid – can destroy the electric
of the machine.
– Check the state of the air valve filter from time to time and clean or replace it
when necessary. When frequently using the same fluid can it should be cleaned
thoroughly before adding new fluid. This reduces the chances of the machine
clogging up.
– If you install the
Viper 2.6
make 100% shure that a permanent fog-free air
supply for the unit is guaranteed. Cooling air with too high fog concentration
(very often in Clubs and Discos) can condense inside the machine and cause
moisture damage.
– For cleaning the surface of the device use a suitable, solvent-free cleaner.
–
PLEASE NOTE
: It is not necessary to clean the vaporizer! Cleaning with any
liquid/fluid can destroy the heat exchange module!