COMPUTERSCALES
®
XLi
App Versions 1.23 – 1.25
The control box and tablet are connected wirelessly via
Bluetooth®. Occasionally the pairing between the two
could be lost and you will need to repair them. This is a
very simple process that takes less than a minute.
PREPARE:
Close the COMPUTERSCALES XLI app (if
open) and turn the control box off (if on).
START:
Tap the
Settings
icon to get to the settings
page, tap Connections at the very top left, then tap the
Bluetooth® icon (be sure
Bluetooth®
is on –slide green
bar to the right ).
At the upper right in
MY DEVICE
tap the empty box on
the right. This temporarily allows connection to unpaired
devices – your control box. You have 2 minutes to
complete the pairing process (plenty of time). See the
countdown timer. If you do not get the control box paired
in this time you will need to start over.
Once you tap this box and the timer has started, press
and HOLD the control box ON button. The LED will turn
red. At this point release the ON button and momentarily
push it again. The LED will go out, and then come back
on steady green. In a few seconds the tablet will ‘whistle’
and a message will come up
“DO YOU WANT TO PAIR WITH THIS DEVICE?”
Tap OK. Now open the app.
Within 5-10 seconds the connection will be made, and the
tablet will display weights.
If it still does not function – display weights – your security
system ID (SysID) may have been corrupted.
See Enter SysID section and re-enter it. This is very quick
and simple.
Pair the Control Box with the
Tablet
17
