Long Range Systems
6
LRS
Connect Transmitter User Manual
Initial Power Up and Time Set
1. After the transmitter initializes, the set date menu is shown, type in the current date
(Using MM/DD/YY) and press ENTER.
2. When the display asks to enter time, type in the current time and select F1 (AM) or F2 (PM).
LRS Reporting Set Up
Log into LRS Connect, select the applicable location where you’ll be using the transmitter and then click
on Add a Transmitter and enter the Transmitter Device Code on the transmitter by following these steps:
Note: The Device code is a 10 digit code from your LRS connect account.
Step 1 - Press Setup button
Step 2 - Press in code - 56789
Step 3 - Press 1 System
Step 4 - Press 2 LRS Connect
Step 5 - Press 1 Device Code
Step 6 - Press F1 (SET)
Step 7 - Enter the 10 digit code and then F1 (OK)
Step 8 - Transmitter will display, “Checking Server, please wait”
Step 9 - Transmitter will display, “Success!”
Step 10 - Transmitter will display, “Success!” Press F4 (EXIT) to return to the main menu
or continue pressing until you are out of the settings.
Transmitter Connectivity Status
To view the current link status of the LRS Connect Transmitter Transmitter:
1. Press SETUP and enter Password.
2. Press 1) System.
3. Press 2) LRS Connect.
4. Press 3) Status.
5. The screen will now show the current Transmitter Connectivity Status. If the Status is OK, then
the link is successful.