Long Range Systems
19 LRS
Connect Transmitter User Manual
Set to Page Staff or Guest Pagers
In cases where the unit will always be paging staff pagers, the transmitter default can be set to page either
Guest or Staff pagers. Factory default is Guest:
1. Press SETUP and enter Password.
2. Select 1 (1: Default Mode).
3. Select 1 (Guest Paging) for guest pager or 2 (Staff Paging) for staff pager.
Create Alphanumeric Messages
If your staff pagers are alphanumeric, they can display 77 different pre-set messages (numbered 000
through 076), and 22 additional user-defined messages of up to 32 characters per message (077 through
099).
1. Press SETUP and enter Password.
2. Press 3) Other.
3. Press 1) Canned Message.
4. At the Canned Msg.# screen select F3 (EDIT) to edit message, (use (F1 (up) or F2 (DN) to scroll
through messages to edit).
5. If no message exists at the Edit Message screen, type a new message. If a message exists, press
F3 (EDIT) to change it. Enter the desired message using the number keys, waiting until the cursor
moves between letters (i.e. for letter ‘E’ press #2 twice). Similar to a Cell Phone.
6. Press the ENTER key to save your message.