Long Range Systems LRS Connect TX-7471 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 53

Long Range Systems LRS Connect TX-7471 Скачать руководство пользователя страница 23

Guest Message

The Guest Message is the default canned message sent to Guest Alpha Pagers. To change the message.

1. Press SETUP and enter Password.

2. Press 1 for 1) System.

3. Press F2 (DN) until 1)POCSAG-> is displayed.

4. Press 1 for 1)POCSAG->.

5. Press 3 for 3) Guest Message.

6. Type a number 00-99 for selected canned message and press ENTER.

Note:

See pg. 16 for Creating Alphanumeric Messages.

Display the Guest and Staff Prompt

When paging Guest or Staff Alpha Pagers, the user is shown a prompt:

Connect Transmitter screen Display

SELECT PAGE MODE

MSG: 035 - - - -

OUT: TABLE READY

To Enable or Disable Seeing This Prompt While Paging:

1. Press SETUP and enter Password.

2. Press 1 (System).

3. Press F2 (DN) until screen shows 1 (POCSAG).

4. Press 1 (POCSAG).

5. Press F2 (DN) until screen show 1 (Msg Editing).

6. Press 1.

7. Press 1 to select Guest or Staff.

8. Press 3) Auto send.

9. Press F1 (Yes) or F4 (No).

If Display Prompt is disabled, the message sent will default to the Guest or Staff Message.

Long Range Systems

22 LRS

Connect Transmitter User Manual

«
...
21
22
23
24
25
...
»

Содержание LRS Connect TX-7471






















































Отзывы:

Нет отзывов