manualshive.com logo in svg

Long Range Systems LRS Connect TX-7471, Руководство пользователя, Страница: 49 / 53

Поделиться
Скачать
Long Range Systems LRS Connect TX-7471 Скачать руководство пользователя страница 49

Long Range Systems 

48  

LRS Connect Transmitter User Manual

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
 

(1) This device may not cause harmful interference.

 

(2)  This device must accept any interference received, including interference that may cause unde-

sired operation.

2.  Changes or modifications not expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

 

NOTE:

  This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there 

is no guarantee that interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of the following measures:
 

• Reorient or relocate the receiving antenna.

 

• Increase the separation between the equipment and receiver.

 

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

 

• Consult the dealer or an experienced radio/TV technician for help.

“

RF Exposure Guidance

In order to comply with FCC / ISED RF Exposure requirements, this device must be installed to provide at least 

20 cm separation from the human body at all times.
 
Afin de se conformer aux exigences d’exposition RF FCC / ISED, cet appareil doit être installé pour fournir au 

moins 20 cm de séparation du corps humain en tout temps.”

Содержание LRS Connect TX-7471






















































Отзывы:

Нет отзывов