Introduction
3
Original Document
Copyright © 2017 Loma Systems
The User Interface
Guidelines describe how to navigate around the user interface and also provides description
of the screens, through which you can setup and manage all parameters required for
inspecting products and for the general operation of the machine.
Operating Instructions
Instructions are provided describing how to set up and configure the machine, including
adding new products for inspection.
Maintenance
Instructions are provided describing the correct procedure for the inspection and cleaning of
the X
5c
X-Ray Inspection System.
Document Change Control
The information contained in this guide is believed to be accurate at the time of writing. It is
subject to changes and additions over time to improve on the information provided and in
line with changes made to the system. For any feedback or necessary changes, please
contact us at
Document Key
The following special text may be used throughout the document. The icons and colour
coding have the following meanings:
Hyperlinks
:- Indicates a hyperlink, so tapping on the text will display another page.
:- Indicates an email hyperlink, so tapping on the text will open a new
message window in your email system.
:- Indicates a web hyperlink, so tapping on the text will open the page
in your default web browser.
Notes and Warnings
Warnings are used to identify possible hazards which may cause damage to, or
malfunction of the equipment, loss of life, bodily damage or ill health in any form,
either immediate or latent. Loma Systems cannot be held responsible for injury to
anyone, however caused, where Warnings have been ignored or taken lightly.
Notes are used to provide supplementary information.
