62
Inspection and Cleaning
Document Number: 814212-2.0-ENG
Original Document
Inspection and Cleaning
Cleaning Materials Required
The Loma X
5c
X-Ray Inspection System is designed for wash down cleaning using a mild
detergent and then thoroughly rinsing the machine with clean water. A damp non-abrasive
cloth only should be used to clean the touch screen.
Do not inject water directly into or at any electrical components, the front touch
screen or any bearings, bushes or drives.
Do not inject water directly into or at any electrical components, the front touch screen or
any bearings, bushes or drives.
If chemicals are used they must not cause harm to the materials used in the manufacture of
the system. The following are included:
Grade 304 stainless steel (frame, enclosure and covers)
Polyurethane belt
High density curtains
Screen – Coated Aluminium frame / bezel
Stainless Steel / Acetal (hinges and handles)
PBT (bearing housings)
Under no circumstances should the machine be subjected to a high pressure
wash down cleaning regime.
