22
8.7.
Settings
The settings can be activated with a swipe from the left.
Information:
All software versions of the individual devices and the
number of charging cycles are displayed here.
Bike Selection:
Here you can see a list with the available Lohner-Falkons®.
Here you can add, remove and rename the Lohner-Falkons®.
Changing the PIN code:
Here you can change your PIN code. For this you will always
need the original PIN code, which you received with the
factory delivery.
Language selection:
Select your preferred language. At the time of this writing,
you can choose between English, French, German, Spanish
and Italian. The language is changed immediately. There is
no need to restart the app.
Locking function of the bike:
This function was described in chapter 8.5. By pressing the symbol, you switch between the
locking and riding modes.
8.8.
Battery
The battery is equipped with technology that reduces the input surge current by means of a
soft start. In addition, the battery is equipped with short circuit detection and prevents
switching on under these conditions. In addition, the built-in Li-Ion cells are actively balanced
during the charging process. The electronics for monitoring these functions (called BMS) can
supply the battery pack for several months without charging. Upon first delivery, the battery
charge will be between 10% and 30%. Please fully charge the battery before first use.
You also must charge your battery to at least 80% every 6 months.
If your drive system switches off automatically because the battery is weak, you must charge
the battery within 4 weeks, otherwise the battery could become damaged which is not covered
by the warranty.
After a deep discharge, charge the battery within 4 weeks! Otherwise irreparable
damage may occur.
1
2
3
4
5
Figure 18: Main menu
