25
Only use the original charger, otherwise you risk serious damage that could result in fire. The
charger has various safety mechanisms. If a malfunction is detected, this is indicated by the
corresponding LED indicator.
Overview of the safety functions:
➢
Short circuit detection at the battery outlet - charging stops - LEDs flashes red
➢
Overvoltage protection - charging stops - LED flashes red
➢
Low voltage protection - charging stops - LED flashes red
➢
Over current protection - charging stops - LED flashes red
➢
Does not start if the battery voltage is in an undefined state (deep discharge battery)
➢
Time lapse - charging stops with time lapse - LED flashes red
The charger has an LED indicator:
➢
Switched on: Red
➢
Charging: Orange
➢
Fully charged: Green
➢
Error: Flashing red
Ensure the following battery charging conditions:
➢
Humidity: 20% - 85% relative humidity
➢
Temperature: 0°C
–
40°C
➢
Power supply: AC 100 ~ 240 V 50/60Hz
The charger is intended for indoor application only.
You must remove the battery from the bike to charge it.
Observe the number of charging cycles:
The number of charging cycles can be seen in the app in the "Information" menu.
Figure23Figure23
