11
6.4.
Installing the battery
The battery is inserted into the bicycle (Figure5) from the rear and pushed onto the battery rail
provided for this purpose. The battery locks with a distinct click. Afterwards it is mounted
correctly.
When mounting the battery, make sure it is turned off.
Figure5: Mounting the battery in the direction of the arrow
6.5.
Adjusting the light
Adjust the headlamp so that the light beam is not too high so that other drivers are not blinded.
The headlamp should be adjusted so that the center of the beam illuminates the ground at a
distance of 5 m from the headlamp.
Figure 6: Adjusting the light
6.6.
Assembling the pedals
The pedals are in a separate box. The pedals are labelled with a sticker. “L” means that the pedal
is for the left side in the direction of travel. “R” is for the
right side in the direction of travel. Use
the accompanying tool to mount the pedals. The right pedal has a right-hand thread (tighten
clockwise). The left pedal has a left-hand thread. (Tighten anti-clockwise)
Kommentiert [WS1]:
New paragraph
