Logik L4SCAN11, Инструкция по эксплуатации

Страница: 11 / 30

11
Scan an Original
1. Insert your photo, document or name card with the side to be scanned
facing upward and in correct orientation, place the left edge of the original
against the left edge of the feed slot, and then adjust the guide lever so
that it is against the right side of the original. Do not apply any force to the
original.
• Do not remove the memory card or disconnect the power supply
while the indicators are blinking.
• This scanner only supports output images in JPEG (.jpg) and PDF
(.pdf) format, and the date/ time attribute will not be added.
• If the memory card is near full (lower than 1MB), the power
indicator light blinks. Use another card or delete some files on it if
necessary.
• Insert only one original at a time, and insert the next original only
when the previous one is done and the blinking has stopped,
otherwise the scanner may malfunction.
• The scanner will not scan when the power adapter is connected.
2. Gently push the original into the feeding slot and let go when it begins to
feed into the slot.
3. When the scan is completed, the scanner will automatically create a folder
on your memory card or flash disk.
4. If the file format is PDF, another folder will be created.
Picture A4 paper Name Card