CLONING MODES AND SETTINGS
Logicube SuperSonix User’s Manual
21
Debug
This user selectable feature allows log trace reports
to be captured via USB or Serial port to a terminal
program like HyperTerminal. Once saved, these
reports can be e-mailed to Logicube technical
support
for advanced hard drive troubleshooting.
Choose Debug -
ON
or
OFF
Debug Trace select -
Serial Port
or
USB Port
Performing Updates on the (Optional) SAS Adapter
It is good practice to occasionally verify that your
SAS Adapter is running the current BIOS,
Kernel, Firmware and Software versions. This is
not something that will need to be updated
frequently. Tap the SCSI/SAS icon under
Miscellaneous to gain access to the icons used
to update the Firmware, BIOS, Kernel and
Software revisions of the Optional Logicube SAS
Adapter.
BIOS Upgrade is used to upgrade the BIOS of
the adapters PCB assembly.
Kernel Upgrade is used to upgrade the OS of
the adapter.
The Application Upgrade is used to upgrade the
Capture Application for the SAS adapter. This
update will most likely be performed more
frequently than the other update listed in this
section.
FPGA Upgrade is used to upgrade the Firmware
of the adapters PCB assembly.
Tap the following Icons in succession to display
a list of the current programming installed in
your SAS Adapter:
