CLONING MODES AND SETTINGS
Logicube SuperSonix User’s Manual
41
4. The “Generalize” switch is optional. It will not
affect the success of the cloning process,
but is recommended for the following
reasons:
−
It will invoke the PnP mechanism of Vista
upon booting the cloned targets. This is a
good feature if the targets are to be
placed in PCs of widely varying hardware
devices (e.g. Video cards, network cards,
motherboards, CPUs etc.).
−
It will force application of new SID values
system-wide. This is desirable if two or
more of the cloned drives will “live” in the
same Active Directory domain.
5. The computer will turn off. Remove the
Master drive, and do not boot it again. Your
Master drive is now ready for cloning.
Optional Preference Settings
In addition the different cloning modes, there are
preference settings that can be used to adjust the
behavior of the cloning operation. Each of these
preference settings is accessible within each
cloning mode menu. Cloning modes are accessible
from the main Settings menu.
NOTE
: Not all preference settings are available in
every cloning mode.
NOTE
: Logicube strongly recommends against
using a hard drive that has been shown to have bad
sectors as new defects are likely to develop.
Speed
The speed setting provides the option to manually
set the speed at which an operation will be
performed at.
