15
2-6 Receiving a call
a) The handset is not on its base.
•
The handset rings (according to settings).
• The icon
flashes on the LCD screen
• Press key
(4)
•
Speak with your correspondent
• When the call is over, press key
(4)
or place the handset on the base.
b) The handset is on the base.
When the handset is on the base, opening the line depends on the pr
ogramming set
beforehand.
There are 2 programming modes to determine whether, after lifting the handset from its
base, you must either :
• Press key
(4)
(AUTO PKUP mode ON)
Or • Do not press key
(4)
(AUTO PKUP mode OFF)
Y
ou must use the following procedure to program one of these modes :
•
Press key
(7)
.
• “
PHONE BOOK
” is displayed on the LCD scr
een.
• Press key (
6)
to select “
HANDSET
”
• Press key
(7)
.
• Press key (
6)
until “
AUTO PKUP
” is displayed on-scr
een.
• Press key
(7)
.
• The current setting is displayed on-screen.
• Press key (
5)
or
(
6)
to select the r
equired mode of operation.
ON (the line will be opened for a call when the handset is picked up).
ARRET (la ligne ne sera pas prise au décroché lors d’un appel).
• Press
(7)
to validate the setting.
• Press and hold key
(9)
to r
eturn to standby mode.
N.B. :
During this pr
ocedure, the previous mode is restored automatically after 60 seconds of
inactivity on the keys.
C
OK
OK
OK
OK
14
2-5 Dialling a number
a) Standar
d dialling procedure
•
The handset is on standby (no call tone).
• Press key
(4)
•
The
and
icons are displayed on-screen and the indicator light
(14)
on
the base switches on.
• You will hear the call tone
• Dial the number of your correspondent
• At the end of the call, press key
(4)
or place the handset on the base.
b) Pr
edialling
•
The handset is on standby (no call tone).
• Dial the number of your correspondent
• The number is displayed on-screen
• Press key
(4)
•
The
and
icons are displayed on-screen and the indicator light
(14)
on
the base switches on.
• The number is dialled automatically
• At the end of the call, press button
(4)
or place the handset on the base.
c) Redial function for the last 10 numbers dialled
•
The handset is on standby (no call tone).
• Press key
(5)
•
The last number called is displayed on-screen
• Use key
(5)
or
(
6)
to select one of the last 10 numbers dialled.
• Press key
(4)
•
The displayed number is dialled automatically
• At the end of the call, press button
(4)
or put the handset on the base.
manque
traduction