LOGICOM CALIS, Руководство пользователя, Страница: 18 / 28

35 34
• Press key (5) or ( 6) to select the desir ed pause duration.
• Press (7) to validate the setting.
• Press and hold key (9) for 2 seconds to r estore standby mode.
NB : During this operation, the handset automatically r eturns to standby when no button has been
pressed for 60 seconds.
2-31 Resetting default settings
The user must know the base’ s PIN code for this function.
This function is used to r estore all the default settings of the telephone.
The following default settings will be obtained :
Call Log : Clear
Entries redial : Clear
Phone Book : Clear
Time : 12:00
Date : 01-01
Listening volume : 4
Internal handset ring tone : 1
External handset ring tone : 3
Volume of handset ring tone : 4
Volume of base ring tone : 4
Base ring tone : 3
R Key : 4 (300 ms.)
Pause function : 4 (3 seconds.)
Language : French
Beep key : On
Low battery alarm : On
Handset out-of-range alarm : ON
Automatic response : On
Handset name : DECT
C
OK
34
2-30 Pause Function
When the user dials a number he/she may inser t a pause by holding down key (5)
/P
for 3 seconds (after dialling at least one figure) then finish dialling the number.
This automatically inserts a pause in the number dialled. The PAUSE function may be sto-
red in the same manner as an ordinary number in the directory’s 25 memories.
NB : Key (5)
/P
will not run the PAUSE function if no figure has been dialled before
triggering it.
Modifying the duration of the pause :
CAUTION : The pause’ s default setting is a duration of 3 seconds (position 4) as this is how it
works in France. However, modifying this time may prove essential for informed users.
Four pause times ar e available :
- Position 1 corresponds to 1 second.
- Position 2 corresponds to 1.5 seconds.
- Position 3 corresponds to 2 seconds.
- Position 4 corresponds to 3 seconds.
T o modify the pause duration, follow the operation below :
• The handset is on standby (no call tone).
• Press key
(7)
• “ PHONE BOOK ” is displayed on-scr een.
• Use key ( 6) to select " SETTING"
• Press key (7) .
• “
BASE VOL
” is displayed on-scr een.
• Press key ( 6) until “ P AUSE ” is displayed on-scr een.
• Press key
(7)
.
• The pause duration used is displayed (“ P AUSE: 4 ” for position 4, for example).
OK
OK
OK