LOGICOM CALIS, Руководство пользователя, Страница: 13 / 28

25 24
• The set ring tone sounds and is displayed (“ MELODY : 3 ” for example).
• Press key (5) or ( 6) to select a ring tone.
• Press key (7) to validate the setting.
• Press and hold key (9) for 2 seconds to r estore standby mode.
N.B. : During this operation, the handset automatically r eturns to standby when no button has
been pressed for 60 seconds.
2-18 Adjusting the ring tone volume on the handset
The ring tone volume on the handset can be set to :
• MUTE (ring tone switched off)
• 5 levels (1 minimum to 5 maximum)
• CRESCENDO (the ringing gradually becomes louder)
The default ring tone volume is : 4.
To set the ring tone volume, follow the steps below :
• The handset is on standby (no call tone).
• Press key (7)
• “ PHONE BOOK ” is displayed on-scr een.
• Press key ( 6) to select “ HANDSET ”
• Press key (7)
• “ BEEP ” is displayed on-scr een.
• Press key ( 6) until “ RING VOL ” is displayed on-scr een.
• Press key (7)
• Press key (5) or ( 6) to select either :
• “ MUTE ”, “ CRESCENDO ” or “ VOLUME X ” (X r epresents the level between 1 and 5).
• Press key
(7)
to validate the setting.
• Press and hold key (9) for 2 seconds to r estore standby mode.
N.B. : During this operation, the handset automatically r eturns to standby when no button has
been pressed for 60 seconds.
C
OK
OK
OK
OK
C
OK
24
2-16 Displaying the call duration
The call duration is displayed after 15 seconds.
In minutes-seconds: “ 00-15 ”.
At the end of each call, the call duration is displayed for 2 seconds.
2-17 Choosing a ring tone on the handset (external and
internal call)
The ring tone for an exter nal call can be different from that of an interphone call.
Choosing a ring tone :
• The handset is on standby (no call tone).
• Press key (7)
• “
PHONE BOOK
” is displayed on-scr een.
• Press key ( 6) to select “ HANDSET ” on the scr een.
• Press key (7)
• “ BEEP ” is displayed on-scr een.
• Press key ( 6) until the following is displayed :
• “ INT MEL ” to select the ring tone for an inter nal call
OR
• “
EXT MEL ” to select the ring tone for an exter nal call
• Press key (7)
OK
OK
OK