SMARTNEO-2G: CASCADING MANUAL // PAGE 13
5 PRODUCT
5.1 ABOUT CASCADING
Cascading is the process of connecting two SMARTneo-2G Control Boxes together in order to control extra
Actuators. A maximum of 4 Actuators can be connected. Each Actuator must be of the same type.
In Cascading Systems, the two Control Boxes are connected by a Sync Cable (LOG-CBL-SMARTneo-
SYNC-1000). The process of creating a Cascading System consists of two stages:
1. Connecting the components (Chapter 6.5 - 6-7)
2. Performing a Reference Drive (Chapter 7.1)
5.2 ABOUT THE SMARTNEO-2G
The SMARTneo-2G is a Control Box for height-adjustable tables. There are variants of the SMARTneo-2G for
specific domestic mains power supplies (e.g. EU or US). The exact variant is denoted by the product’s order
code. Consult the accompanying Datasheet to ensure that you have received the correct variant. The func-
tions your SMARTneo-2G Control Box can fulfil is also dependent on parameterization.
NOTICE
This Cascading Manual is only valid for the SMARTneo-2G (2nd generation). Consult your
product's Datasheet and Type Plate to ensure this is the correct Manual for your product.
5.2.1 CONTROL BOX CONNECTION POINTS
1
DC/Com Port (Sync Cable)
2
Motor Port 1 (M1)
3
Motor Port 2 (M2)
4
Hand Control Port (HC)
5
AC Input Port (Power Cable)
Fig. 2:
Control Box Connection Points
5.2.2 HAND CONTROL
All instructions assume the reader has assembled a Table System that will be controlled by a Hand Control
with an UP Key and DOWN Key. If your Table System is operated by a different User Interface, consult that
product’s operating Manual for instructions on operating the Table System. The availability of some func-
tions depends on the Hand Control used. This section describes two variants:
• Comfort Hand Controls
- These products have a digital display and can save Memory Positions
• Basic Hand Controls
- These products have only an UP and DOWN key
Hand Control Keys are represented as follows for further description:
UP Key
DOWN Key
SAVE
SAVE Key
1 2 3 4
Memory Position Keys
4
5
1
2
3
