SILVERsensor Manual
17
iv.
Re-connecting the System
1. Re-attach the Base Platform using the Platform Screws,
2. Connect the SILVERsensor Cable to the SILVERsensor.
If your Bed has an Underbed Light:
Connect the Underbed Light Cable to the SILVERsensor Cable.
3. Plug the SILVERsensor cable into the empty Side Rail Port
v.
Completing Assembly
1.
Re-attach the Base Platform using the Platform Screws
2. Replace the Mattress
3. Plug the Power Converter back into the Power Outlet
4. Perform a Flat Position Reset (see Manual).
12 pin
2 pin
10 pin
8 pin
Insert and Turn
INFO