SILVERsensor Manual
18
7. Assembly: Lite Frame
i.
Before you start
1. Make sure the Bed Frame is in the Flat Position.
2. Unplug the Power Converter from the Power Outlet.
3. Remove the Mattress from the Bed Frame
4. Remove the Control Box from the Net
ii.
Preparing the Base Platform
1. Remove the Base Platform by unscrewing the Platform Screws
2. Place the Platform face-down on the floor (net facing up).
iii.
Mounting the SILVERsensor
1.
Attach all 4 Damping Elements next to the holes (marked)
2. Find and mark the Mounting Position
(below the open side of the net, see above.)
3. Place the SILVERsensor in the Mounting Position. Mark the
intended position of the Mounting Screws.
4. Screw in the Mounting Screws with a screwdriver.
Mounting Area
Mounting Area
Damping
Element
Sensor this
way up
