SILVERsensor Manual
16
6. Assembly: Standard Frame
i.
Before you start
1. Make sure the Bed Frame is in the Flat Position.
2. Unplug the Power Converter from the Power Outlet.
3. Remove the Mattress from the Bed Frame.
4. If relevant, unplug the Underbed Light Cable from the Side Rail.
ii.
Preparing the Base Platform
1. Remove the Base Platform by unscrewing the Platform Screws
2. Place the Platform face-down on the floor.
iii.
Mounting the SILVERsensor
1. Attach all 4 Damping Elements next to the holes (marked)
2. Find and mark the position of the SILVERsensor on the Platform
3. Screw in the SILVERsensor Mounting Screws with a screwdriver
4. Attach the Cable Clamp (Twin XL and Queen only, see page 14)
A. Mounting position, no massage motor. B. Mounting position, with massage motor
Damping
Element
Sensor
this way
up.
Position A Position B
To Head
Platform
