SILVERsensor Manual
3
1. Introduction
i.
About SILVERsensor
Thank you for choosing SILVERsensor by LOGICDATA. With
SILVERsensor, every effort has been made to ensure your comfort
and safety. This Manual is intended to enable persons to assemble
and operate the product safely. However, incorrect installation of
the product, or usage outside of the intended use described in this
Manual may lead to hazardous situations. In Chapter 2, “Safety”,
and throughout this Manual, potential risks, their consequences,
and steps to avoid harm are explained.
Observing the safety instructions in this Manual will help you to
avoid hazards and minimize damage to the system. All persons
involved in the assembly of the system must have the full product
documentation available to them at all times. Product documentation
consists of this Manual and any other relevant documents supplied
by the manufacturer. Documentation must always be kept complete
and legible.
In this manual, you will find important information that will help you
install the product correctly and safely. Important safety instructions
are included in Chapter 2 of this Manual. You are required to
read all safety instructions carefully before installing or operating
SILVERsensor.
ii.
Copyright
Copyright® This original documentation is protected by copyright.
All rights, especially the rights to translate or reproduce the
document, are reserved. No part of this manual may be reproduced
mechanically, electronically, or by other means, in any form, without
prior written permission of LOGICDATA Electronic & Software
Entwicklungs GmbH. Violations involving copyright may result in
legal action.
2020 LOGICDATA Electronic & Software Entwicklungs GmbH
