DMUI-EASY2MOVE - OPERATING MANUAL // PAGE 16
1. Gently push and hold down the paddle until the table stops at the lower position limit
2. Release the Paddle
3. Push and hold down the Paddle again
▸ The table will move down slightly, then up again
4. Release the Paddle
▸ The Position Reset Procedure is complete.
INFO
If your DYNAMIC MOTION system has been parameterized with additional stopping points
(e.g. a Container Stop Position), repeat Step 3 until the table has moved upwards again.
7.4 FACTORY RESET (S0 RESET)
With this function, you can reset the DYNAMIC MOTION system to its factory settings.
1. Press the SAVE Key once, then release
2. Press and hold the SAVE Key for 10 seconds
▸ The LED will light up Red
3. When the LED light begins to blink, release the SAVE Key
The DYNAMIC MOTION system has now been reset to its factory settings. It is now in the same state as it
was during the first start-up.