Framer’s Edge Elite Mat Cutter
Instruction Manual
Model 650-1 / 655-1 / 660-1
3
Logan Graphic Products Inc., 1100 Brown St, Wauconda, IL 60084 847-526-5515 [email protected]
LoganGraphic.com
Handle Bar
Square shaped handle used to raise
Cutting Bar to vertical position
Bevel Cutting Head
Straight Cutting Head
Cutting Board
Cutting Bar Scales
Dual inch/metric scale recessed into cutting bar to
be used together with the bottom production stop
Squaring Arm Stop
Aluminum stop that slides onto
either end of the Squaring Arm
and tightens into position
Bottom Production Stop
Production Stop tightens to the Cutting Bar Rod and stops the
cutting head at the location determined by the scale setting
Mat Guide
Movable, parallel guide bar
used to set border width of
the mat being cut
Cutting Bar
Heavy-duty extruded Cutting
Bar with non-stick coating
and polished surface
Slip Sheet
A piece of scrap matboard
that is placed beneath the
mat when bevel cutting
Squaring Arm
Right angle back stop
necessary to hold material
square to Cutting Bar
Cutting Board
3/4” thick laminate
surface Cutting Board
Identification of Machine Components
Cutting Head
Mounting block that
glides on cutting bar
and contains both bevel
and straight cutting
blade holders
Depth Adjustment Screw
Adjustment screw used to
set bevel cutting head to cut
various thickness matboard.
Bottom Overcut
Adjustment
For adjusting overcut at
the bottom of the mat
Top Overcut
Adjustment
For adjusting overcut
at the top of the mat
Lock-Down Pin
Pin for locking Straight
Cutter in down position
Top
Production Stop
Movable stop which
connects to cutting
head. Allows fast
production cutting
of mat board
Indicator Plate
Metal outrigger with green and
red arrow used to accurately
start and stop on marked lines
resulting in minimal overcuts
Depth
Adjustment Knob
Knob adjusts to 3
depth settings
Blade Holding Screw
Screw for tightening
blade in head
