Framer’s Edge Elite Mat Cutter
Instruction Manual
Model 650-1 / 655-1 / 660-1
12
Logan Graphic Products Inc., 1100 Brown St, Wauconda, IL 60084 847-526-5515 [email protected]
LoganGraphic.com
Troubleshooting
Helpful Hints
Avoid Board Warp
- Always store your Mat Cutter flat.
Clean Guide Rail
- Only use evaporative solvents such as lighter fluid or alcohol. Do not lubricate the Guide Rail.
Cutting a Border Less Than 3/4”
- Mark mat (back side) using a pencil and do not use Mat Guide.
Blade Life
- Use only authentic Logan blades to ensure best results. No two blades last the same amount of time. Size of mats and differences in
mat board effect blade life. It is best practice to use a new blade whenever starting a new project.
Problem
Solution
Hooks or Curves
•
Blade depth set too deep.
•
Blade is dull.
•
Blade is catching on previous cut in Slip Sheet.
•
Uneven pressure being applied to
Cutting Head during cut.
Overcut on Top Cut
•
Blade depth set too deep.
Overcut on Bottom Cut
•
If too small - align start and stop indicator slightly below
pencil line and cut.
•
If too big - align start and stop indicator slightly above
pencil line and cut.
Mat Borders Uneven
•
Mat Guide not parallel.
Ragged Bevel Cut
•
Cutting without a Slip Sheet.
•
Slip Sheet is worn out.
•
Not changing the blade often enough.
Not Cutting Through
•
Machine not on a level surface.
•
Not using a Slip Sheet as least as long as the
mat you are cutting.
•
Blade depth set too shallow.
Warranty
Logan Graphic Products, Inc. (“Logan”) warrants the model 650-1 / 655-1 / 660-1 FRAMER’S EDGE ELITE to be free from defects in parts
and workmanship for a period of two years from the date of original purchase. Logan warrants that it will either repair or replace, in its sole
discretion, any necessary replacement parts found to be defective. Should the product need to be returned to Logan for repair or replacement
parts, authorization for any return must come from Logan in writing. Costs of returning the product to Logan, including insurances, shall be
borne by the purchaser. Logan shall not be liable for any damages or losses, incidental or consequential, direct or indirect, arising from the
use of this product. This warranty extends only to the original purchaser and is not assignable or transferable. This warranty is in lieu of all
other warranties, expressed or implied. Be advised that any Logan products purchased as “new” from an unauthorized dealer, such as an
online auction site or similar, may be void of their warranty.
Logan Graphic Products, Inc.
1100 Brown Street Wauconda, IL 60084
800/331-6232 or 847/526-5515
