10
OS 170 Fertilizer Spreader OM
Connecting to Tractor (Cont’d)
For PTO Drive Models (Cont’d)
Attaching PTO
1
540 RPM Input Shaft
Connect the PTO to the shaft (1) on the spreader.
1
2
Pull pin (1) that secures the jack (2) to the frame and
rotate into the storage position as show. Reinsert pin to
secure.
For Variable Rate Ready and Ground Drive
Models
1
Adjust bolts (1) on the clevis (if necessary) to be level as
possible with the tractor drawbar height.
Connect to the tractor and install an approved hitch pin
for the load, securing hitch pin with a safety locking pin.
Connect the safety chains to the tractor. Connect surge
breakaway chain to tractor.
Remove the jack and secure in the storage position. (See
photo to the left).
Controller/Monitor Connections (Variable
Rate Ready Only)
For spreaders equipped with hydraulic drive, connect the
controller harness on the spreader to the mating harness
on the tractor.
Set-up and Operation
Содержание OS 170
