99
ENG
Residual heat
The glass ceramic top is divided into4 (or 5)
heating zones. To ensure extra safety, it has
indicator lights (residual heat indicators), which
light up when a zone is very hot.
The indicators stay lighted for as long as the
heated zone remains hot, even with the plates
OFF.
How to use the glass ceramic top
When using the top for the first time, we advise
you to turn ON the heating zones one at a
time for few minutes, in order to eliminate any
humidity accumulated in the insulation.
To avoid heat dispersion and for excellent
performance, we advise you to use pots with a
flat, thick bottom.
Furthermore, whenever possible, the pots
should be of the size as the heating zone being
used.
The heated zone stays hot for a certain period
of time. You should therefore exploit this by
switching the plate off a few minutes before
end of cooking, so that you finish cooking by
exploiting the residual heat accumulated by the
glass, and save on energy.
We advise you to clean when the glass has
cooled. Wash the glass with the type of liquid
detergent as per supplied sample, or with soapy
water.
For stubborn dirt, use the supplied scraper. Do
not use abrasive material such as Scotch bryte,
metal sponges or the like.
Take care not to spill sugar while cooking,
because impossible to remove deposits could
be formed.
Any cast-iron pots or with a rough bottom tend
to leave light coloured traces, which can be
removed with a cloth dampened with vinegar.
WARNING:
when the top is in operation or the residual
heat indicator is ON, take great care, and
keep children away.
Accessible parts of the oven can become
very hot while the grill is operating. Children
should be kept at a safe sistance.
If the glass ceramic breaks, disconnect
electric power and call in the Lofra
Authorised Service Centre.
LAY-OUT FOR CONNECTING KITCHEN GLASS CERAMIC WORKTOP
220 - 240 V ~
3 x 6 sq.mm H05VW-F
380 - 415 V 3N ~
5 x 2.5 mmq H05VW-f
5.13 Fitting the fat filter to
giant multiple function oven
• Place tabs A-B in line with the holes in
the fan cover A1-B1 at back of the oven.
•
Press rod C so that the tabs fit perfectly
into the holes A1-B1.
Fitting the gas burners to the hob
Burners: auxiliary, semi-rapid, rapid, super ra-
pid:
•
To fit the burners, flame diffusers and
the enamel burner caps correctly in the
hob cups, follow the sequence illustrated
in figure. Ensure that the cup burner
guides and the burner flame diffuser
guides are matched perfectly.
•
Treble crown burner: fit the flame
diffuser to the burner support so that it
cannot rotate.
