89
ENG
5.7 DIGITAL PROGRAMMER FOR “RUSTICA” COOKERS
COOKING PROGRAMMER
HOUR ADJUSTMENT
In order to adjust the hour on the clock, push
4 times the knob until the icon “CLOCK” blinks.
To increase or decrease the time, turn the knob
clockwise or anticlockwise, the minute hand will
move in one-minute intervals.
After 10 second from the last regulation the
timer will set up automatically.
MANUAL COOKING
When off, the timer allows the manual cooking
by pressing the general button of the oven.
END COOKING PROGRAMMATION
Programming the end cooking time allows
starting and finishing the cooking in an
automatic way according to the programmed
hour.
To program the end of the cooking, briefly push
the knob twice until the “STOP” icon flashes.
To increase or decrease the cooking time turn
the knob clockwise or anticlockwise until the
desired time is reached.
The flashing of the “STOP” icon continues for 10
seconds from the last setting, if by this time the
programming isn’t made, the function ends and
the hands will return to display the time.
Push the knob to confirm the program (at least
2 minutes) so the cooking can start. To display
the selected program push the knob quickly.
At the end of the cooking the “STOP” icon will
flash and the alarm will beep. After 1 minute the
alarm will be disabled, but the “STOP” icon will
keep on flashing until the knob is pushed.
To stop the program before the settled time,
push the knob for 3 seconds: the program
will be deleted and the timer will return to the
manual cooking set up.
START COOKING DIGITAL PROGRAMMER
Programming the start cooking time allows to
automatically start and stop the cooking.
To program the start cooking time, briefly push
the knob until the “START” icon flashes.
To increase or decrease the start cooking time,
turn the knob clockwise or anticlockwise.
The flashing of the “START” icon continues for 10
seconds after the last setting.
If by this time the programming isn’t made,
the function ends and the hands will return to
display the time.
If the knob is pressed the cooking start time
is set (at least 1 minute) (the “START” icon is lit
on and steady). The next step is the setting of
the end cooking time (the “STOP” icon starts
flashing).
To program the end cooking time follow the
procedure below.
The two icons “START” and “STOP” will remain
on to indicate successful programming.
TIMER PROGRAMMING
The timer programming allows to set a simple
alarm at the end of a programmed time without
starting up the cooking.
To set an alarm, press briefly the knob three
times until the icon “TIMER” stars flashing.
Then turn the knob, the timer programming is
identical to the end cooking time program (see
the relevant paragraph)
The timer can be used only when there is no
ongoing function.
DISPLAY OF THE SELECTED PROGRAM
To display the selected program briefly press
the knob, at the same time the programmer
displays the program moving the hands on the
selected time. The flashing of the relevant icons
indicates the different phases.
The programmer will then return automatically