70
english
Loewe bild | Extended operating instructions
General usage
channel order manually. If LCN is set to off, the channels will be sorted by frequency and you have the option to manually sort the channels.
Once you have completed the settings, press the right arrow button on the remote control to start the tuning process.
Tuning Satellite channels
From the main menu, select [Settings] -> [Channel] -> [Auto Scan] -> [Change Setup] and select [Satellite]. Press the right arrow button
to go to the next screen. Select your satellite operator from the list, or if you wish to tune the satellite manually, select option [Standard].
In the next screen select your satellite system:
[Single Satellite] – Use this option if only one satellite is connected to the TV.
[DiSEqC] – Use this option if you have DiSEqC equipment. DiSEqC 1.0 supports up to 4 satellites. If you have motorized antenna, use
DiSEqC 1.2
[Unicable] – If you have Unicable satellite distribution in your home, select this option. Make sure you know the Unicable band and frequency
that can be used. This information should be available on the equipment or can be provided to you by the landlord.
Press the right arrow on the remote control to proceed to the next setup step.
You will be given the option to select the type of channel you want to tune to. To tune in free and encrypted channels, select [All Channels].
Select [Free Channels] to tune only free channels.
Once you have completed the settings, press the right arrow button on the remote control to start the tuning process.
This option opens the channel management window with multiple options. You can edit the channel list, edit favourites lists, export to
USB, or import from USB.
Editing the Channel list
From the main menu, go to [Settings] -> [Channel] > [Channel Edit] and select the channel list or favourites list you want to edit.
Select the channel or multiple channels you want to move or delete with OK. A check mark appears next to the selected channels.
To move selected channels to a new position: Press the left arrow button on the remote control and use the up/down arrows to move the
selected channel(s) to a new position.
To delete selected channels: Press the right arrow button on the remote control and confirm deletion.
To restore deleted channels: Press the red button on the remote control. Press the OK button to select the channels you want to restore,
then press the left arrow to return them to the channel list.
Filter: Press the yellow button on the remote control to display the filter, where you can select the type of channel to display in the channel list.
Search: Press the blue button on the remote to search for a specific channel by entering its name in the search box.
Exporting / Importing channel list via USB
To export channel list to USB: Make sure you have an external USB storage device connected to your TV. From the main menu, go to [Set-
tings] -> [Channel] -> [Channel Edit] and select [Export to USB]. The channel list is exported to the connected storage device.
To import channel list from USB: Connect the USB storage device containing the exported channel list. From the main menu, go to [Set-
tings] -> [Channel] -> [Channel Edit] and select [Import from USB]. The channel list is imported.
[Advanced Settings] – Advanced settings related to TV channels.
[Manual Scan] – Allows you to scan a single digital TV multiplex or a single analogue TV channel.
[Channel List Auto Update] – Some programme providers offer an automatic update of the channel lists. You may allow or block an
automatic channel list update.
[Programme Guide Auto Update] – The TV will automatically update the TV Guide during the night in standby mode.
[CI+ Module Settings] – Settings for CAM module / CI+ card.
Accessibility
[Audio Type] – Audio settings for the visually impaired.
[Audio Type] – Sets the audio type for TV channels.
[Normal] – Standard audio without audio commentary.
[Visually Impaired] – Plays a special soundtrack for the visually impaired whenever one is available. This soundtrack uses an
audio commentary to describe the action taking place on-screen.
[Voiceover Volume] – Changes the volume of the narration audio track separately from the standard audio.
[Subtitle Settings] – Subtitle settings.
[Subtitle] – Here you can pre-set whether a subtitle is always to be displayed as soon as it is offered by the channel.
[Primary Subtitle] – Default subtitle language.
[Secondary Subtitle] – Secondary subtitle language when primary subtitle languages are not available.
System
[Time] – Sets the internal time of the TV. The correct time is important if you use reminders or time recording.
[Time format] – Here you can select the format in which the time will be displayed on the TV. 12 or 24-hour format.
[Date/Time] – If option [Auto Synchronisation] is turned on, the TV will automatically get the time information from the digital TV
broadcast or the Internet. If this option is deactivated, you can set the date and time manually.
[Time Zone] – Make sure the correct time zone is selected here, as an incorrect time zone may result in the wrong time on the TV.
[Daylight Saving] – Here you can manually set daylight saving time on or off. The [Sync from DTV] function sets the daylight saving
time automatically based on the information received from the digital TV stream.
[Timer Settings] – Settings for different TV timers.
[Sleep Timer] – Sets a sleep timer that automatically turns off the TV after a set time.
