5
2 Description
2.1 Theory of Operation
The EQ CL32 is used in mobile and stationary applications, where UV adhesives are
cured reproducibly at high intensities. It allows time controlled and continuous UV
exposure.
In mobile applications, a trigger button is used to start the exposure, either in timed or in
continuous mode of exposure. The device contains a battery, so it can be used cordless
in mobile applications. In stationary applications, the device is operated from its interface.
The interface triggers the UV LED and allows monitoring of UV LED activity externally.
The device is powered directly from USB in stationary applications.
To ensure reproducible curing processes the UV LED current and temperature are
permanently monitored. If the UV LED current is incorrect (e.g. empty battery) or an over
temperature occurs, curing is interrupted and an error is notified. The type of error is
identified by a visible status indicator and a beep sound. It can be connected to a higher
ranking controller for confirmation that the UV LED is on and OK.
2.2 Operating Elements and Connections
1
Trigger Button
2
Tip Guard Rubber
3
UV Light Output Side
4
Mini USB Power Port
5
Indicator
6
Control Interface
(M5 connector), pin assignment see section 7.3.
