10
11.5. LED indicator and Ports
Yacht Router Standard 4G has multiple LED indicators. Red LED on a power button indicate that device is powered on. Yacht
Router Standard 4G is equipped with eight Ethernet ports. Each port is equipped with green and yellow LED indicator for data
traffic indication.
SAT 1
and
SAT 2
are intended for connecting various WAN equipment like satellite modems or routers but it can also be used for
ADSL or similar equipment.
VESSEL NETWORK 1
,
VESSEL NETWORK 2
and
VESSEL NETWORK 2
are dedicated for connection of any LAN equipment like
computers, printers, IP cameras etc. For each VESSEL NETWORK (1, 2 or 3) you can independently select Internet source
(WAN). Each vessel networks can simultaneously be connected to the Internet. For example, computer connected to VESSEL
NETWORK 1 can go to the Internet via VSAT satellite connection, computer connected to VESSEL NETWORK 2 can go via Inmarsat
FleetBroadband, while in the same time computer connected to VESSEL NETWORK 3 will reach the Internet via Hotspot in the
marina.
BACKBONE 1, BACKBONE 2
and
BACKBONE 3
are used to connect Remote Vessel-to-Shore WIFI Module, Touch Screen Controller
4G and/or WIFI Extenders to expand vessel WIFI coverage. It is not important which port you will dedicate to mentioned device.
To connect Remote Vessel-to-Shore WIFI Module or WIFI Extenders to Yacht Router Standard 4G you have to use Gigabit PoE
injector (female, CAT5P-03). It will inject 24 VDC power to LAN cable to power remote devices.
DC OUT FUSE
- fuse for DC
OUT 1, 2 and 3 outputs
SAT
port - for any WAN source (VSAT modem,
FleetBroadband router, etc)
VESSEL NETWORK 1
&
2
port - for any Ether-
net equipment (computers, printers, etc)
SAT 1, SAT 2
- satellite WAN ports for satellite
routers or modems connections. Ports can be used
for any other WAN equipment (e.g. ADSL routers)
DC OUT 1, 2, 3
- 24 VDC
power outputs for Giga-
bit PoE injectors (female,
CAT5P-03). Used for WIFI
Extenders connections.
SIM card slot
- DO NOT
PUSH the card all the way-
in! Properly inserted sard
will stick out about 1cm.
