7
11.
INSTALLATION INSTRUCTIONS
Install Yacht Router in a dry indoor space that will meet Operating environment range specifications (chapter 9.6). Follow the
installation procedure as specified in this chapter.
11.1.
Connecting WIFI and mobile network antennas
WARNING: NEVER POWER ON YACHT ROUTER IF WIFI AND MOBILE NETWORK ANTENNAS ARE NOT CONNECTED TO YACHT
ROUTER TO AVOID SEVERE DAMAGES ON WIFI AND MOBILE NETWORK MODULES THAT CAN VOID THE WARRANTY.
Connect WIFI antennas (Client-to-Vessel) and mobile antenna as showed on the following photo:
IMPORTANT: If Yacht Router Standard is installed in a place where WIFI signal degradation can occur we suggest you to use
WIFI Extension cable (WLEC-01) to install Client-to-Vessel WIFI antenna (WLAN-A-05) on a better position.
Yacht Router Standard 4G is equipped with
Remote Vessel-to-Shore WIFI module
. It is used for connecting Yacht Router Standard
4G to Hotspots in marinas or similar WIFI access points. Remote Vessel-to-Shore WIFI module is Power over Ethernet device that
use single LAN (e.g. CAT5, CAT6) cable for powering and data transfer.
Locomarine WIFI 5 antenna
(swivel, indoor) - WLAN-A-05
Locomarine MOB 5 antenna
(swivel, indoor) - 3G-A-01
