Locomarine NMEA0183 TO ETHERNET CONVERTER, Руководство по установке

Страница: 9 / 21

9
2.1. CONNECTING POWER SUPPLY
To power Converter connect it to DC power source using supplied DC power cable. Power cable consist of RED and BLACK wire. Connect RED wire to positive (+) and BLACK wire to negative
(ground -) power source as indicated on a following photo.
You can also use power cable with standard 5.5 mm connector (not supplied) where inner pin is positive (+) and outside ring is negative (-).
IMPORTANT
Never connect more than one power source at the same time. Connecting multiple power supplies at the same time can damage device and void a warranty.
Wrongly connected DC power cable can damage device and void a warranty.
Voltage lower than 5 V and higher than 36 V can damage device and void a warranty.
CHAPTER 2 - INSTALLATION